Adafruit Parts Pal

Description

LEDs and passives and transistors and switches oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.

Kit Contents:

Prototyping:

1x – Storage box with latch
1x – Half-size breadboard
20x – Male/male jumper wires – 3″ (75mm)
10x – Male/male jumper wires – 6″ (150mm)

LEDs:

5x – 5mm Diffused green LEDs
5x – 5mm Diffused red LEDs
1x – 10mm Diffused Common-Anode RGB LED

Capacitors:

10x – 1.0uF Ceramic capacitors
10x – 0.1uF Ceramic capacitors
10x – 0.01uF Ceramic capacitors
5x – 10uF 50V Electrolytic capacitors
5x – 100uF 16V Electrolytic capacitors

Resistors:

10x – 560 ohm 5% axial resistors
10x – 1K ohm 5% axial resistors
10x – 10K ohm 5% axial resistors
10x – 47K ohm 5% axial resistors

Semiconductors:

5x – 1N4001 Diodes
5x – 1N4148 Signal Diodes
5x – NPN Transistor PN2222 TO-92
5x – PNP Transistor PN2907 TO-92
2x – 5V 1.5A Linear voltage regulator – 7805 TO-220
1x – 3.3V 800mA Linear voltage regulator – LD1117-3.3 TO-220
1x – TLC555 wide-voltage range, low-power 555 Timer

Sensors:

1x – Photocell
1x – Thermistor (Breadboard version)
1x – Vibration sensor switch
1x – 10K Breadboard trim potentiometer
1x – 1K Breadboard trim potentiometer

Mechanical:

1x – Piezo buzzer
5x – 6mm Tactile switches
3x – SPDT slide switches
1x – 40-pin Break-away male header strip
1x – 40-pin female header strip

Datasheets:

TLC555
PN2222A
MPS2907A
LD1117
L7805CV
Eletrolytic Capacitor
Thermistor

Resistance at 25 degrees C: 10K +- 1%
B25/50 = 3950+- 1%
Thermal time constant <= 15 seconds
Thermistor temperature range -55 °C to 125 °C

INFO:
Pagina del Produttore

Additional information

Weight	0,05 kg
Dimensions	5 × 1 × 3 cm
Brand	Adafruit