Pololu Universal Aluminum Mounting Hub for 1/4″ Shaft, #4-40 Holes (2-Pack)

Pololu Universal Aluminum Mounting Hub for 1/4″ Shaft, #4-40 Holes (2-Pack)

Pololu Universal Aluminum Mounting Hub for 1/4″ Shaft, #4-40 Holes (2-Pack)

8,73

Disponibile

8,73

Availability: 2 disponibili COD: P-1993 Categoria:

Descrizione

These universal mounting hubs are designed to work with most 0.250 inch (6.35 mm) shafts, including round shafts and “D” shafts, such as those on our NEMA 23 stepper motors. Each of the two included hubs has six mounting holes for #4-40 screws (not included), letting you mount custom wheels or mechanisms to your motors. The four included #4-40 hex set screws (two for each hub) allow secure coupling of shaft to hub, and a 0.05″ hex wrench (often the smallest size in SAE Allen wrench sets) is included for use with the set screws. A dimension diagram of the hub is available under the resources tab.

These hubs will work with our NEMA 23 stepper motors, and they also work with 80 mm and 90 mm Pololu wheels.

Informazioni aggiuntive

Peso 0.05 kg
Dimensioni 5 × 1 × 3 cm
Brand

Pololu

Board

Arduino

Hai appena aggiunto questo prodotto al carrello:

EnglishFrenchGermanItalianSpanish