Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero, Stable 5V Power Output

Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero, Stable 5V Power Output

27,30 

Esaurito

27,30 

Disponibilità: Esaurito COD: WS-19739-PT0 Categorie: ,

Informami quando l'articolo è disponibile.

Descrizione

Uninterruptible Power Supply For Pi Zero

Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries
Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring

Features At A Glance

The UPS HAT (C) is an uninterruptible power supply module specialized for Raspberry Pi Zero series. It incorporates Li-po battery switching charger with path management, voltage boost chip, and voltage/current monitor which allows monitoring the battery operating status via I2C bus.

  • Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards
  • Li-po battery recharge chip, with dynamic path management, more stable power supply
  • Voltage boost chip, providing regulated 5V power output
  • I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable
  • Recharging indicator for monitoring the battery operating status
  • Comes with development resources and manual
Pogo Pin Connector

Supports Raspberry Pi Zero Series (Pinheader Should Be Soldered),
Allows Attaching Other HATs On The Top

Real Time Monitoring

Monitoring The Battery Voltage, Current, Power, And Remaining Capacity Via I2C

What’s On Board

  1. ETA6003: recharge manager
  2. TPS61088: voltage boost chip
  3. INA219: voltage/current monitor
  4. S8261: Li-po battery protection chip
  5. FS8205: Li-po battery protection MOS
  1. Pogo pins: for connecting with Raspberry Pi Zero
  2. USB recharge port: 5V charger input
  3. Battery header: for connecting 803040 Li-po battery
  4. Power indicator
  5. Recharging indicator

Pinout

Package Content:

  1. UPS HAT (C) x1
  2. 1000mAh Li-po battery x1
  3. Screws pack x1

Resources

Demo codes

Document

Informazioni aggiuntive

Brand

Waveshare

Specifications
OUTPUT VOLTAGE 5V CHARGER 5V
CONTROL BUS I2C BATTERY 803040 Li-po battery
1000mAh 3.7V
MOUNTING HOLE SIZE 3.0mm DIMENSIONS 65 × 30mm