12mm Coin Cell Breakout w/ On-Off Switch

12mm Coin Cell Breakout w/ On-Off Switch


In stock


Availability: 2 in stock SKU: AD1867 Categories: ,


Simple but effective – this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1″ pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.

Comes with one fully assembled and tested breakout plus a small stick of 0.1″ header so you can solder it on and plug into a breadboard.

We also have a version without a switch


25mm x 23mm x 1.5mm / 1″ x 0.9″ x 0.06″
Mounting hole distance: 18mm x 16mm / 0.7″ x 0.6″
Weight: 2g

Pagina del Produttore

Additional information

Weight 0,05 kg
Dimensions 5 × 1 × 3 cm