Maxbotix Ultrasonic Rangefinder - LV-EZ1
43,60 €
Ultrasonic proximity sensor. AND? capable of detecting objects from 0 to 6.45 meters and provides information on the distance from 16cm to 6.45m with a resolution of 2.54cm. Objects that are 0 to 16cm away will be indicated as 16cm away. The data is communicated in different formats: PWM, analog signal (Vcc / 512 for each inch or 2.54cm), and serial digital output with a baud rate of 9600.
- Description
- Product information
Description
LV-EZ1 Maxbotix Ultrasonic Rangefinder provides very short to long range detection and ranging, in an incredibly small package. It can detect objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches to 254-inches with 1-inch resolution. (Objects from 0 inches to 6-inches range as 6-inches.) The interface output formats included are pulse width output (PWM), analog voltage output (Vcc / 512 volts per inch), and serial digital output (9600 baud).
A good sensor for when a Sharp IR distance sensor won't cut it. For example of using this with an Arduino, see the Halloween Pumpkin project.
LV-EZ1 Data Sheet / Product Information Guide is available here.
The different LV models have different beam width patterns, check this image for a comparison of all the LV model beam patterns. For higher sensitivity, check out the HR-LV models - they have up to 1mm sensitivity and 5 meter range!
TECHNICAL SPECIFICATIONS:
Datasheet
TUTORIALS:
BPM85 / 180 [by Adafruit]
Product information
| Weight | 0,05 kg |
|---|---|
| Length | 5x1x3 cm |
| BRAND | Adafruit |
