Slow Vibration Sensor Switch (Hard to trigger)

Description

The “poor man's” accelerometer / motion sensor! These spring-vibration switches are low sensitivity non-directional vibration induced trigger switches. Inside is a stiff spring coiled around a long metal pin. When the switch is moved, the spring touches the center pole to make contact. So, when there's motion, the two pins will act like a closed switch. When everything is still, the switch is open. Great for basic projects and wearables!

We also have a version with a less stiff spring which makes it a little easier to trigger, and a version with a very soft spring which makes it much easier to trigger!

Electrical characteristics:

Maximum Voltage: 12v
Contact Resistance: <10 ohm Contact Time: 2 ms Maximum Current: 20mA Insulation Resistance:> 10M ohm
Temperature Range: -40 to 80ºC
Operating life span: 100,000 cycles

Diameter: 5mm / 0.2 ″
Height (w / pins): 21mm / 0.8 ″
Height (w / o pins): 11mm / 0.4 ″
Weight: 0.30g

Product information