GSM / GPRS / GNSS / Bluetooth HAT for Raspberry Pi
32,05 €
Notify me when the item is available.
- Description
- Product information
- Specifications
Description
Overview
This is handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.
It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.
General
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
- Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
- Bluetooth 3.0, supports data transferring through Bluetooth
- Onboard USB TO UART converter CP2102 for UART debugging
- 6x LEDs for indicating the module working status
- SIM card slot for 1.8V / 3V SIM card
- RTC with backup battery holder
- Baudrate auto detection (1200bps ~ 115200bps)
- Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
- Supports SIM application toolkit: GSM 11.14 Release 99
- Comes with development resources and manual (examples for Raspberry Pi/ Arduino / STM32)
What's on Board
- SIM868 module
- ZMM5V1: regulator diode
- SMF05C: TVS diode
- CP2102: USB TO UART converter
- MP1482: power chips
- NDC7002N: voltage level translator
- GPS status indicator
- NET indicators:
- flashes fast when the module starts up
- flashes slowly after GSM register succeed
- STA module working status indicator
- SIM868 UART Tx / Rx indicator
- Power indicators
- SIM868 control button: press the button and hold for 1s, to startup / shutdown the SIM868
- Raspberry Pi GPIO connectors
- SIM card slot
- USB TO UART interface
- 3.5mm earphone / mic jack
- GNSS antenna connector
- Bluetooth antenna connector
- GSM aerial connector
- CR1220 battery holder: for RTC backup battery
- UART selection switch
- A: control the SIM868 through USB TO UART
- B: control the SIM868 through Raspberry Pi
- C: access Raspberry Pi through USB TO UART
Package Content:
- GSM / GPRS / GNSS HAT x1
- GSM Antenna x1
- GPS External Antenna (B) x1
- Bluetooth Antenna x1
- USB type A plug to micro plug cable x1
- RPi screws pack (2pcs) x1
Resources
3D drawing
Product information
BRAND | wave share |
---|
GSM / GPRS
- Band
- GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 MHz
- Quad band auto search
- Compliant to GSM phase 2/2 +
- emitting power
- Class 4 (2W @ GSM 850 / EGSM 900 MHz)
- Class 1 (1W @ DCS 1800 / PCS 1900 MHz)
- GPRS connectivity
- GPRS multi-slot class 12 (default)
- GPRS multi-slot class 1 ~ 12 (configurable)
- GPRS data feature
- Downlink speed: max 85.6kbps
- Uplink speed: max 85.6kbps
- Coding schemes: CS-1 \ CS-2 \ CS-3 \ CS-4
- Supports PAP (Password Authentication Protocol) for PPP connection
- Supports PBCCH
- Supports USSD
- SMS
- Supports: MT / MO / CB / Text / PDU mode
- SMS storage: SIM card
- Audio
- Voice encode / decode mode: Half Rate \ Full Rate \ Enhanced Full Rate \ Adaptive muti rate
- Supports echo cancellation
- Supports noise reduction
GNSS
- Receiver type
- 33 tracking channels
- 99 acquisition channels
- GPS L1 C / A code
- Sensitivity
- Tracking: -165 dBm
- Cold starts: -148 dBm
- Time-To-First-Fix
- Cold starts: 28s (typ.)
- Hot starts: <1s
- Warm starts: 26s
- Accuracy
- Horizontal position: <2.5m CEP
Bluetooth
- Integrates AT commands
- Compliant to Bluetooth specification 3.0 + EDR
- Supports SPP, OPP, HFP / HSP, etc.
Misc
- Operating voltage: 5V
- Operating temperature: -40 ° C ~ 85 ° C
- Storage temperature: -45 ° C ~ 90 ° C
- Dimensions: 30.2mm x 65mm