Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, MF (4-Pack)

Description

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6mm apart, which is just the right height for mounting expansion boards with extra-tall female headers, and they have 6mm-long M2.5 threads that they are just the right size for the Raspberry Pi's mounting holes. These standoffs are sold in packs of 4.

These aluminum hexagonal standoffs match the height of ours extra-tall 2 × 20 female headers and can be used to mount expansion PCBs and HATs know that they clear all of the components on the Raspberry Pi Model A + and Model B + as well as the Raspberry Pi 2 Model Bs, Raspberry Pi 3 Model B, and Raspberry Pi 3 Model B +. The body of each male-female standoff is 18.6 mm long by 4 mm wide. The male threads extend another 6 mm past the standoff body, and the female threads extend at least 6.35 mm into the body. You can easily screw multiple units together to make longer standoffs. The threads are M2.5 on both ends, since this matches the size of the Raspberry Pi mounting holes. We carry M2.5 nuts and 6 mm M2.5 screws separately.

Using 18.6 mm aluminum standoffs to mount an A-Star 32U4 Robot Controller on a Raspberry Pi 2 Model B.

Other sizes

We also carry 11mm-long standoffs that match the height of ours standard-size 2 × 20 female headers and can be used to compactly mount expansion boards to a Raspberry Pi. These 11mm standoffs are available with 4mm-long male threads or with 6mm-long male threads.

Mounting expansion boards to Raspberry Pis with 11 mm aluminum standoffs (left) and 18.6 mm aluminum standoffs (right).

Product information