Screwless Terminal Block: 5-Pin, 0.1 ″ Pitch, Side Entry (2-Pack)

Screwless Terminal Block: 5-Pin, 0.1 ″ Pitch, Side Entry (2-Pack)


Available version :: 10 available COD: P-2423
Quantity discounts
1-2 1,89
3-5 1,83
6+ 1,80
  • Description
  • Additional information


Thesis side-entry screwless terminal blocks have a pitch of 0.1 ″ (2.54 mm). Each block has five spring terminals 26 - 18 AWG wires, allowing for easy, temporary connections to your PCB, They are rated for 150 V, 2 A (UL) and ship in packs of two.

Select options:

DescriptionSpecs (9)Pictures (5)Resources (0)FAQs (0)On the blog (0)


These terminal blocks can be easily connected to a terminal. Various sizes (two-way and top-entry) and two-pin spacings (0.1 ″ and 0.2 ″):

Select options:

These terminal blocks can be combined to make longer ones, or segments can be removed to make them shorter. Each block has two pins per terminal, and they are intended for use with PCBs that have the appropriate footprints; they do not work well with solderless breadboards because the legs are too short.

Details for item #2423

This product is a two-pack of 0.1 ″ -pitch, five-pin, side-entry terminal blocks. The general dimension diagram for this screwless terminal is shown below:

Screwless terminal block: 0.1 ″ pitch, side entry.
  • Voltage rating (UL / IEC): 150 / 130 V
  • Current rating (UL / IEC): 2 / 6 A
  • Contact resistance: 20 mΩ
  • Wire gauge: 26-18 AWG
  • Wire strip length: 11 mm

Reconfiguring the terminal blocks

It is possible to reconfigure these terminal blocks by combining them to make larger ones or to remove segments to make them shorter. To combine two terminal blocks, you must first off the end cap from one. With the end cap removed, there is nothing to hold the last place, so be careful not to lose it!

Removing the end cap from a 6-pin side-entry screwless terminal block.

Once the end cap is removed, you can line up with the holes on the side of another terminal block and press them together. The following two show pictures combining two 6-pin side-entry screwless terminal blocks into a single 12-pin block:

Attacking another screwless terminal block to the first place
We have now combined two 6-pin side-entry screwless terminal blocks into a single 12-pin terminal block.

Other terminal block options

We carry several different sizes of terminal blocks in addition to these screwless terminal blocks; the picture below shows a side-by-side comparison:

Side-by-side comparison of our different terminal blocks with a 0.1 ″ bad header strip for size reference. From left to right: 0.1 ″ screwless, 0.1 ″ screw, 3.5 mm screw, and 5 mm screw.
Select options:
  • 0.1 ″ screw terminal, which can be used in place of standard 0.1 ″ male and female headers on many PCBs; the only available orientation is side-entry:

Additional information

Weight 0.05 kg
Dimensions5 × 1 × 3 cm