12mm Coin Cell Breakout w / On-Off Switch

Description

Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on / off switch and 0.1 ″ pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.

Comes with one fully assembled and tested breakout plus a small stick of 0.1 ″ header so you can solder it on and plug into a breadboard.

We also have a version without a switch

Dimensions:

25mm x 23mm x 1.5mm / 1 ″ x 0.9 ″ x 0.06 ″
Mounting hole distance: 18mm x 16mm / 0.7 ″ x 0.6 ″
Weight: 2g

INFO:
Producer's page

Product information