Vibrating Mini Motor Disc
2,60 €
Vibrating mini motor. It works with voltages from 2V to 5V. Diameter 10mm. A 5V requires 100mA, to 4V 80mA, to 3V 60mA, to 2V 40mA. Reaches 11000RPM at 5V.
- Description
- Product information
Description
* BZZZZZZZZZZ * Feel that? T.hat's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed.
Two wires are used to control / power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will be buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also to stronger vibration.
If you want to reduce the current draw / strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required!
Dimension: 10mm diameter, 2.7mm thick
Voltage: 2V - 5V
5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
11000 RPM at 5V
Weight: 0.9 gram
Product information
| Weight | 0,05 kg |
|---|---|
| Length | 5x1x3 cm |
| BRAND | Adafruit |
