12V Solenoid Valve - 3/4 ″
8,86 €
Notify me when the item is available.
- Description
- Product information
Description
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the ¾ ”threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
Notes: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L / min of flow. Although the datasheet shows the valve working at 220 VAC, it's actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve. A garden hose or other pressurized system should work just fine.
documents:
Data Sheet (AQT15SP)
Product information
Weight | 0,05 kg |
---|---|
Length | 5x1x3 cm |
Producer | Unbranded / Generic |
MPN | ROB-10456-E6 |
Brand | Sparkfun |