Mini Robot Rover Chassis Kit - 2WD with DC Motors
Unleash your inner Mad Max and make your vehicle dreams a reality with the Mini Robot Rover Kit. This kit gives you everything you need to build the shell of a 2-wheel-drive Robot Rover! You get the chassis, 4-6 VDC motors and wheels. You'll fill in the rest with power supply, microcontroller or microcomputer and a dual H-bridge motor controller. We of course have suggestions to run the motors like our TB6612 breakout, Motor FeatherWing, Motor Shield for Arduino, or Motor HAT for Raspberry ...
MicroUSB Plug to 5.5 / 2.1mm DC Barrel Jack Adapter
The premise of this MicroUSB Plug to 5.5 / 2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm / 2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to something that expects to connect to 5V USB. Since this does not have any resistors or other connections inside for the data lines, this won't work for charging an iPhone, iPod or iPad or other device which expects some sort ...
Mini Chiclet Keyboard - USB Wired - Black
Mini Qwerty USB Keyboard for Raspberry Pi and other computers equipped with USB.
USB Cable with Switch
Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects. Comes with a USB A socket on one end and a USB A plug on the other. In between is an in-line switch that is rated for 2 Amps. The data lines are not connected through - this is a ...
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
DC / DC boost converter with recharging circuit for lithium batteries. It is capable of converting the voltage of LiIon / LiPoly lithium batteries from 3.7-4.2V to 5V (5.2V to be exact) with a current of 1A. It is compatible with iPad, iPhone, iPod, Arduino, Raspberry Pi etc. Make sure that the charger / adapter connected upstream of the MicroUSB is able to supply 2A and is of good quality. A USB connector is included to solder on the output. If you don't need 1A and iPad compatibility, we have ...
VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from 5V-12V
Convert just about any battery pack to 5V with VERTER - our fresh new Buck-Boost power converter. VERTER can take battery voltages from 3-12VDC and output a nice 5V DC, which makes it a perfect universal power supply for your portable project! Where Verter really shines is when you have a battery or power range that can fluctuate a lot, or you don't know what you'll end up using. It operates smoothly over the 3-12V range, moving from a boost converter ...
Acrylic Stand for 16 × 2 Character LCD
Support for 16x2 LCD display. Acrylic material.
USB Cable with Switch - A / MicroB
USB A / Micro B cable with switch. Length 1,5 meters.
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA
DC / DC boost converter with battery charging circuit. Lithium LiIon / LiPoly battery input from 3.7-4.2V, Output 5V (5.2V to be exact) at 500mA. A solder-on USB connector is included.
