XBee Module – Series 1 – 1mW with Wire Antenna – XB24-AWI-001

XBee Module – Series 1 – 1mW with Wire Antenna – XB24-AWI-001


Modulo wireless XBee serie 1, con antenna a filo. Consigliato per iniziare con XBee, la serie 1 è molto semplice da configurare, se due moduli sono presenti nel loro raggio d’azione, formeranno automaticamente una connessione seriale. Attenzione, i piedini hanno un passo di 2mm, non è lo stesso di una breadboard (2.54mm)! Puoi trovare  un adattatore QUI.

Availability: 1 disponibili COD: AD128
Quantity discounts
1-2 35,49
3-5 34,43
6+ 33,72
  • Descrizione
  • Informazioni aggiuntive


This is our most popular XBee wireless module: the series 1 802.15.4 protocol 1mW with wire antenna. Its good for point-to-point, multipoint and convertible to a mesh network point. We suggest this module for those starting out as it is the easiest to get going: if there are two XBees in the same area they will automatically ‘sync’ and pass serial data back and forth without any additional work or configuration

What we like about the Series 1 modules is that they are so easy to get set up. If you have two in range, they will automatically form a serial link with no configuration, so you can send TTL serial data back and forth. You can also configure the baudrate, as well as sleep modes, power modes and tons more stuff using the Digi XBee tool.

The pins on an XBee are 2mm spacing, not 0.1″ so they will not fit into a breadboard. For that reason, they work best in our XBee adapter module kit (which has a 250mA 3.3V regulator) or with the USB XBee adapter.

This module comes with a wire antenna, its the same price as a chip antenna but 50% more range because of the improved antenna, awesome!



  • Dimensions: 27mm x 24mm x 9mm (1in x 0.9in x 0.3in)
  • 4g ( 0.15oz)


This handy chart from Digi shows the differences between all of the different XBees in the family

Informazioni aggiuntive

Peso 0.05 kg
Dimensioni 5 × 1 × 3 cm

Hai appena aggiunto questo prodotto al carrello:

English EN Italian IT