MiFare Classic (13.56 MHz) tag assortment – 1KB

MiFare Classic (13.56 MHz) tag assortment – 1KB

MiFare Classic (13.56 MHz) tag assortment – 1KB


In stock


Assortimento di tags MiFare Classic da 1KB,  programmabili e leggibili con controller RFID/NFC a 13.56 MHz. I tags possiedono un numero d’identificazione non modificabile di 4-byte. Possono essere usati con PN532 NFC/RFID breakout board e Adafruit NFC/RFID Shield

Availability: 1 disponibili COD: AD365 Categorie: ,
Quantity discounts
1-2 10,90
3-5 10,68
6+ 10,46


One of each of our favorite Mifare Classic 1K tags – 5 in total!

  • Credit card size
  • 1″ diameter ‘laundry’ clear tag
  • 1″ diameter ‘laundry’ white tag
  • Key fob
  • Sticker

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID Shield for Arduino!

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another – the ID number cannot be changed.


S50 chip specification:

  • 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
  • Built in encryption engine with 48-bit key
  • 4 Byte unique identifier burned into the chip
  • 13.56 MHz frequency


NXP S50 datasheet

Informazioni aggiuntive

Peso 0.05 kg
Dimensioni 5 × 1 × 3 cm




Hai appena aggiunto questo prodotto al carrello: