Adafruit Parts Pal

Description

LEDs and passives and transistors and switches oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.

Kit Contents:

Prototyping:

1x – Storage box with latch

1x – Half-size breadboard

20x – Male/male jumper wires – 3″ (75mm)

10x – Male/male jumper wires – 6″ (150mm)

LEDs:

5x – 5mm Diffused green LEDs

5x – 5mm Diffused red LEDs

1x – 10mm Diffused Common-Anode RGB LED

Capacitors:

10x – 1.0uF Ceramic capacitors

10x – 0.1uF Ceramic capacitors

10x – 0.01uF Ceramic capacitors

5x – 10uF 50V Electrolytic capacitors

5x – 100uF 16V Electrolytic capacitors

Resistors:

10x – 560 ohm 5% axial resistors

10x – 1K ohm 5% axial resistors

10x – 10K ohm 5% axial resistors

10x – 47K ohm 5% axial resistors

Semiconductors:

5x – 1N4001 Diodes

5x – 1N4148 Signal Diodes

5x – NPN Transistor PN2222 TO-92

5x – PNP Transistor PN2907 TO-92

2x – 5V 1.5A Linear voltage regulator – 7805 TO-220

1x – 3.3V 800mA Linear voltage regulator – LD1117-3.3 TO-220

1x – TLC555 wide-voltage range, low-power 555 Timer

Sensors:

1x – Photocell

1x – Thermistor (Breadboard version)

1x – Vibration sensor switch

1x – 10K Breadboard trim potentiometer

1x – 1K Breadboard trim potentiometer

Mechanical:

1x – Piezo buzzer

5x – 6mm Tactile switches

3x – SPDT slide switches

1x – 40-pin Break-away male header strip

1x – 40-pin female header strip

Datasheets:

TLC555

PN2222A

MPS2907A

LD1117

L7805CV

Eletrolytic Capacitor

Thermistor

Resistance at 25 degrees C: 10K +- 1%

B25/50 = 3950+- 1%

Thermal time constant <= 15 seconds

Thermistor temperature range -55 °C to 125 °C

INFO:

Pagina del Produttore

Additional information

Weight	0,05 kg
Dimensions	5 × 1 × 3 cm
BRAND	Adafruit