LSM303D 6DoF Motion Sensor Breakout

LSM303D 6DoF Motion Sensor Breakout

LSM303D 6DoF Motion Sensor Breakout

9,45

Disponibile

9,45

Availability: 5 disponibili COD: PIM376 Categorie: , ,

Descrizione

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes – X, Y, and Z – as well as three axes of magnetic heading. It’s ideal for building into robots, rockets, and rovers, or anywhere else where you want to measure motion accurately. It’s compatible with Raspberry Pi or Arduino.

The LSM303D 6DoF Breakout has an I2C interface and is 3.3V or 5V compatible. Like our other Pimoroni breakouts, we’ve designed it so that you can solder a piece of right-angle header onto it and then pop it straight onto the bottom left 5 pins on your Raspberry Pi’s GPIO header (pins 1, 3, 5, 6, 9).

It’s also compatible with our fancy new Breakout Garden, where using breakouts is as easy just popping it into one of the six slots and starting to grow your project, create, and code.

Features

  • LSM303D 6DoF Motion Sensor
  • ±2/±4/±8/±12 gauss magnetic scale
  • ±2/±4/±6/±8/±16 g linear acceleration
  • 16 bit data output
  • 3.3V or 5V compatible
  • I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
  • Reverse polarity protection
  • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
  • Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W

Informazioni aggiuntive

Peso 0.1 kg
Dimensioni 3 × 1 × 2 cm
Brand

Pimoroni

Board

Arduino

Hai appena aggiunto questo prodotto al carrello:

EnglishFrenchGermanItalianSpanish