Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

18,11

Esaurito

18,11

Availability: Esaurito COD: P-3134 Categoria:

Informami quando l'articolo è disponibile.

Descrizione

The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with soldered header pins and terminal blocks. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).

Informazioni aggiuntive

Peso 0.1 kg
Dimensioni 3 × 1 × 2 cm
Brand

Pololu

Board

Arduino

Hai appena aggiunto questo prodotto al carrello:

EnglishFrenchGermanItalianSpanish