Ethernet RJ45 Male Plug Terminal Block

Ethernet RJ45 Male Plug Terminal Block

Ethernet RJ45 Male Plug Terminal Block

7,10

Disponibile

7,10

Availability: 1 disponibili COD: AD2913 Categorie: ,

Descrizione

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack – this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren’t recommended for actual Ethernet traffic, especially long term…but for basic power/data distribution, RJ45’s are great!

This is the Ethernet (RJ45) Male Plug Terminal Block. There is a standard RJ45 Ethernet plug on one end, and a screw terminal block on the other.

We also have a (matching) Ethernet Female Jack Terminal Block.

  • Length (end to end): 53.9mm / 21.2″
  • Weight: 17.7g
INFO:
Pagina del Produttore

Informazioni aggiuntive

Peso 0.05 kg
Dimensioni 5 × 1 × 3 cm
Brand

Adafruit

Board

Arduino

Hai appena aggiunto questo prodotto al carrello:

EnglishFrenchGermanItalianSpanish