Male DC Power adapter – 2.1mm plug to screw terminal block

Male DC Power adapter – 2.1mm plug to screw terminal block

Male DC Power adapter – 2.1mm plug to screw terminal block

2,56

Disponibile

2,56

Adattatore per alimentazione DC, da connettore maschio 2.1mm a blocco terminale con viti.

Versione disponibile:: 6 disponibili COD: AD369 Categorie: ,

Descrizione

If you need to connect a battery pack or wired power supply to a board that has a DC jack – this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration (which is the most common)

Informazioni aggiuntive

Peso 0.05 kg
Dimensioni 5 × 1 × 3 cm
Brand

Adafruit

Board

Arduino

Hai appena aggiunto questo prodotto al carrello:

EnglishFrenchGermanItalianSpanish