Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)

Description

Thesis side-entry screw terminal blocks have a pitch of 3.5 mm (0.138 ″). Each block has Two terminals for the stripped ends of 24 - 18 AWG wires, and units can slide together to make longer strips. They are rated for 125 V, 10 A (UL) and ship in packs of four.

It appears all products in Stackable Screw Terminal Blocks.

Overview

These terminal blocks have terminals that hold and release wires through the simple adjustment of a screw, allowing you to easily make temporary connections to a PCB. The 2-pin and 3-pin units each feature a ridge on one side and a slot on the other, which lets them slide and lock together to form arbitrarily long strips with a pitch of 3.5 mm or 5 mm. Each terminal block is available in two orientations: side-entry and top-entry.

Details for item #2444

This product is a four-pack of 3.5mm-pitch, two-pin, side-entry terminal blocks. The general dimension diagram for this screw terminal is shown below.

Screw terminal block: 3.5mm pitch, side entry.

• Voltage rating (UL / IEC): 125/130 V
• Current rating (UL / IEC): 10/10 A
• Contact resistance: 20mΩ
• Wire gauge: 24-18 AWG
• Wire strip length: 5 mm

Other terminal block options

We carry several different sizes of terminal blocks; the picture below shows a side-by-side comparison:

Side-by-side comparison of our different terminal blocks with a 0.1 ″ male header strip for size reference. From left to right: 0.1 ″ screwless, 0.1 ″ screw, 3.5 mm screw, and 5 mm screw.

Product information