FLORA 9-DOF Accelerometer Gyroscope Magnetometer - LSM9DS0 - v1.0

FLORA 9-DOF Accelerometer Gyroscope Magnetometer - LSM9DS0 - v1.0

FLORA 9-DOF Accelerometer Gyroscope Magnetometer - LSM9DS0 - v1.0


In stock


Availability: 1 available COD: AD2020 Categories: , , Tag: , ,
Quantity discounts
1-2 23,94
3-5 23,46
6+ 22,98


Add motion, direction and orientation to your wearable FLORA project with this high precision 9-DOF sensors. 3-axis accelerometer, which is a classic 3-axis accelerometer, which can tell you which direction is 3-axis speedometer. The other is a 3-axis magnetometer that can sense where the strong magnetic force is coming from. The third is a XNUMX-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself.

When we saw the new LSM9DS0 from ST micro we thought - wow this could really make some wearables super smart. Design your own activity or motion tracker with all the data! The sensor has a digital (I2C) interface. Attaching it to the FLORA is simple: line up the sensor so its adjacent to the SDA / SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can connect other devices to the other side by using the set of SCL / SDA pins on the opposite side.

This sensor uses the same Arduino library as our conventional form LSM9DS0 breakout. Check out our Arduino library while we finish up the tutorial. The example and library code will work 'out of the box' with Arduino. Simply download our library and connect the Vin + GND and SCL / SDA pins, install the library properly and upload our test program to read out 9 degrees of motion.

  • Diameter: 16mm / .63 ″
  • Thickness: 0.8mm / .03 ″
  • This board / chip uses I2C 7-bit addresses 0x1D & 0x6B.
Producer's page
LSM9DS0 Datasheet
Adafruit LSM9DS0 Library

Additional information

Weight 0.83 lbs
Dimensions 5 × 1 × 3 cm


You just added this product to your cart: