TTL Serial JPEG Camera with NTSC Video

TTL Serial JPEG Camera with NTSC Video


Module with camera, in output it provides a monochrome NTSC video. You can take color photos from 640 × 480, 320 × 240 or 160 × 120 of this video and send them on the serial TTL link. Images are JPEG pre-compressed. Manually adjustable focus, white balance, brightness and contrast set automatically. It also features motion detection functionality.

Available version :: Sold Out COD: AD397

Notify me when an item is available again.

  • Description
  • Additional information


This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC monochrome video and can take snapshots of that video (in color) and transmit them over the TTL serial link. You can snap pictures at 640 × 480, 320 × 240 or 160 × 120 and they're pre-compressed Perfect for a data-logging, security, or photography project.

One nice thing about this camera is all the extras that come with it. For example it has manually adjustable focus, auto-white-balance, auto-brightness and auto-contrast taken care of for you as well as motion detection built in! That means you can do it.

We also carry an enclosed weather-proof version

Using the module is pretty easy and only requires two digital pins (or a TTL serial port) - by default it transmits at 38400 baud. Of course we would like to give you a good luck, we even spent a lot of time researching the module and DSP to make a really nice Arduino library with example code that shows how to change the image size and compression quality, detect motion, control the video output stream, etc. That and more is available in our very detailed tutorial that will help get the most use out of your room.

Example photo 1 (outside street) & example photo 2 (inside person)

Notes: We are working with Arduino UNOs (and other Atmega328-based 'duinos) but they are not yet MEGA compatible.

  • Module size: 32mm x 32mm
  • Image sensor: CMOS 1 / 4 inch
  • CMOS Pixels: 30M
  • Pixel size: 5.6um * 5.6um
  • Output format: Standard JPEG
  • White balance: Automatic
  • Exposure: Automatic
  • Gain: Automatic
  • Shutter: Electronic rolling shutter
  • SNR: 45DB
  • Dynamic Range: 60DB
  • Max analog gain: 16DB
  • Frame speed: 640 * 480 30fps
  • Scan mode: Progressive scan
  • Viewing angle: 60 degrees
  • Monitoring distance: 10 meters, maximum 15meters (adjustable)
  • Image size: VGA (640 * 480), QVGA (320 * 240), QQVGA (160 * 120)
  • Baud rate: Default 38400, Maximum 115200
  • Current draw: 75mA
  • Operating voltage: DC + 5V
  • Communication: 3.3V TTL (Three wire TX, RX, GND on 2.0mm pitch connector


Fabien's Netduino + Camera tutorial

Additional information

Weight 0.05 kg
Dimensions 5 × 1 × 3 cm