10K Precision Epoxy Thermistor - 3950 NTC
4,78€ VAT INCLUDED
- Additional information
Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 ° C is 10K (+ - 1%). The resistance goes down as it gets warm and goes up as it gets cooler. For specific temperature-to-resistance, check the lookup table.
These are often used for air conditioners, water lines, and other places where they can get damp. The PVC coating of the wires is good to 105 ° C so this isn't good for very hot stuff.
We even have to add more 1% resistor which you can use as calibration or for a resistor divider.
- Resistance at 25 degrees C: 10K + - 1%
- B25 / 50 = 3950 + - 1%
- Thermal time constant <= 15 seconds
- Thermistor temperature range -55 ° C to 125 ° C
- 28 AWG PVC Wire
- Diameter: 1.3mm / 0.5 ″
- Length: At least 457mm / 18 ″ long
|Dimensions||5 × 1 × 3 cm|