Stepper motor - NEMA-17 size - 200 steps / rev, 12V 350mA
16,54€ VAT INCLUDED
Bipolar stepper to 4 wires. 1,8 degrees for each step / step, 200 passes for a complete tour. Maximum current 350mA at 12V. Size of the 42mm side.
- Additional information
Stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8 ° for smooth motion and a nice holding torque. So that it could be driven easily with an engine shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery.
Some nice details includes ready-to-go cable and machined drive shaft (so you can easily attach stuff). We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown (or Gray)
- 200 steps for revolution, 1.8 degrees
- Coil #1: Red & Yellow wire pair. Coil #2 Green & Brown / Gray wire pair.
- Bipolar stepper, requires 2 full H-bridges!
- 4-wire, 12 inch leads
- 42mm / 1.65 ″ square body
- 31mm / 1.22 ″ square mounting holes, 3mm metric screws (M3)
- 5mm diameter drive shaft, 24mm long, with a machined flat
- 12V rated voltage (you can drive it to lower voltage, but the torque will drop) at 350mA max current
- 28 oz * in, 20 N * cm, 2 Kg * cm holding torque per phase
- 35 ohms for winding
|Dimensions||5 × 1 × 3 cm|