DC Motor in Micro Servo Body

DC Motor in Micro Servo Body

DC Motor in Micro Servo Body

4,34 VAT INCLUDED

In stock

4,34 VAT INCLUDED

Availability: 1 available COD: AD2941 Categories: ,
Quantity discounts
1-2 4,34
3-5 4,25
6+ 4,17

Description

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it is not to servant. It's more like a DC motor + plastic gear-train in a box. It's a super powerful motor, it would do well as a little robot wheel. It is a lot less expensive than a micro-servo (continuous or non-continuous) because there is no control board inside. Controlling speed is done by PWM'ing the power leads, controlling direction is done by swapping the power polarity - just like any brushed DC motor.

Runs from 4-6VDC, we've powered it with a Lipoly and 3 alkaline, or 4 NiMH batteries with success. You cannot control this directly from a microcontroller pin! You must have a H-bridge such as a L293D, TB6612 or a Motor shield, Motor HAT or DC Motor + Stepper FeatherWing.

Motor comes with 2x screws and 2x nuts for mounting to chassis. No flanges or horns includedit's a screw to attach once they're plugged together. Build a robot vehicle with your little motors driving it!

  • Dimensions: 32.3mm x 12.3mm x 29.9mm / 1.3 ″ x 0.49 ″ x 1.2 ″
  • Spline Count: 21
  • Weight: 8.4g
  • No load speed: 110RPM (4.8v) / 130RPM (6v)
  • Running Current (at no load): 100mA (4.8v) / 120mA (6v)
  • Peak Stall Torque (4.8v): 1.3 kg / cm / 18.09 oz / in
  • Peak Stall Torque (6v): 1.5 kg / cm / 20.86 oz / in
  • Stall Current: 550mA (4.8v) / 650mA (6v)

Additional information

Weight 0.83 lbs
Dimensions 3 × 1 × 2 cm
Brand

Adafruit

You just added this product to your cart:

EnglishFrenchGermanitalianEspañol