Brushed DC Motor: 130-Size, 6V, 11.5kRPM, 800mA Stal
1,88 €
- Description
- Product information
Description
This 130-size brushed DC motor has a recommended operation voltage of 3 - 12 V and is used in the larger Pololu plastic gearmotors. Approximate specifications at 6 V: free-run speed of 11,500 RPM, free-run current of 70 mA, and stall current of 800 mA.
This is the 130-size DC motor used in the larger Pololu plastic gearmotors (228: 1 offset, 120: 1 offset, 200: 1 90-degreeand 120: 1 90-degree). It has a recommended operating voltage of 3 - 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA. For an estimate of the torque, note that the Pololu 228: 1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the Pololu 120: 1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V. The output shaft has a diameter of 2 mm.
This motor works well with many of our lower-power motor controllers, such as the qik 2s9v1 dual serial motor controller, Orangutan SV-328 robot controller, Baby Orangutan robot controllerand TB6612FNG dual motor driver carrier.
Product information
Weight | 0,05 kg |
---|---|
Length | 5x1x3 cm |
BRAND | Pololu |