RS485 CAN HAT for Raspberry Pi
10,88 €
Notify me when the item is available.
- Description
- Product information
Description
Overview
The RS485CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485 / CAN functions.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
- RS485 function, controlled via UART, half-duplex communication, supports automatic TX / RX control without programming, onboard transceiver SP3485
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
- Reserved control pins, allows to work with other control boards
- Comes with development resources and manual (examples in wiringPi / python)
Specifications
- Operating voltage: 3.3V
- CAN controllers: MCP2515
- CAN Transceiver: SN65HVD230
- 485 transceiver: SP3485
- Size: 65mm x 30mm
- Mounting hole size: 3.0mm
Pinouts
PIN | RASPBERRY PI (BCM) | DESCRIPTION |
---|---|---|
3V3 | 3V3 | 3.3VPower |
GND | GND | Ground |
SCK pins can be used | P11 / SCLK | SPI clock input |
MOTION | P10 / MOSI | SPI data input |
MISO | P9 / MISO | SPI data output |
CS | P8 / CE0 | SPI chip selection |
INT | P25 | Interrupt |
RXD | P15 / RXD | RS485 UART receive |
TXD | P14/TXD | RS485 UART transmit |
CSR | P4 | RS485 TX / RX control (auto control by default, some soldering is required to enable manual control), high for TX, low for RX |
Length
Content Package
- RS485 CAN HAT x1
- RPi screws pack (2pcs) x1
Resources
Documents
Demo codes
Datasheet
3D drawing
Product information
BRAND | wave share |
---|