Assembled Adafruit FeatherWing OLED - 128 × 32 OLED Add-on For Feather

Assembled Adafruit FeatherWing OLED - 128 × 32 OLED Add-on For Feather

Assembled Adafruit FeatherWing OLED - 128 × 32 OLED Add-on For Feather

20,41 VAT INCLUDED

In stock

20,41 VAT INCLUDED

Availability: 5 available COD: AD3045 Categories: ,
Quantity discounts
1-2 20,41
3-5 20,00
6+ 19,59

Description

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds to 128 × 32 monochrome OLED plus 3 user buttons to Any Feather main board. Comes fully assembled so you can connect to Feather on top of your board and take the board flight, no soldering required!

These displays are small, only about 1 ″ diagonal, but very readable two to the high contrast of an OLED display. This screen is made of 128 × 32 individual white OLED pixels and because the display makes its own light, no backlight is required. The power is required to run the OLED and why the display has such high contrast; we really like this miniature display for its crispness! We also can reset buttons and three mini tactile buttons called AB and C so you can add a mini user interface to your feather.

Tested works with our Feather 32u4, M0 and ESP8266 boards. The OLED uses only the two I2C the Feather pins, and you can pretty much stack it with any other

  • OLED UG-2832HSWEG02 Datasheet
  • PCB dimensions: 22.9mm x 50.9mm / 0.9 ″ x 2 ″
  • Display area: ~ 25.8mm / ~ 1.0 ″
  • Weight: 4.8g
  • On 32u4 or M0 Feathers, buttons A, B & C connect to 9, 6, 5 respectively
  • On Huzzah ESP8266 Feather, buttons A, B & C connect to 0, 16, 2 respectively

Additional information

Weight 0.83 lbs
Dimensions 3 × 1 × 2 cm
Brand

Adafruit

You just added this product to your cart:

EnglishFrenchGermanitalianEspañol