22,42€ VAT INCLUDED
- Additional information
The BlackBoard from SparkFun is everything you need in an Arduino Uno with many extra perks. BlackBoard has all the hardware peripherals you know and love: 14 Digital I / O pins with 6 PWM pins, 4 Analog Inputs, UART, and SPI with a handful of external interrupt pins. Blackboard even has an SMD ISP header to connect SPI pins to shields.
We've been learning about making a better Uno and created the BlackBoard. The USB to serial is now done with the ubiquitous CH340G requiring fewer drivers to install and a rock solid microB connector with through hole anchoring. The power portion of the BlackBoard has been reworked: we have upgraded the 3.3V regulator to provide up to 600mA, with full thermal and reverse circuit protection, We've reduced the brightness of the power LED, 13 LED pin, and the TX / RX LEDs from blinding to just perfect. We've added 3.3V voltage translation and a Qwiic connector to the edge of the board2C based Qwiic products.
And for more advanced users we've added an I / O jumper. Cut the trace to 5V and solder to the 3.3V side and the board will run at 3.3V. This is extremely handy if you have a shield or 3.3V sensitive devices, such as an SPI interface, that needs protecting.
The SparkFun Blackboard comes fully tested with the Optiboot bootloader and can be easily programmed with the 'Arduino / Genuine One' option from within Arduino. You can power the BlackBoard over USB or through the barrel jack. The on-board power regulator can handle anything from 7 to 15VDC. Check out the related items below for a compatible wall-wart power supply.
Not sure which Arduino or Arduino - compatible board is right for you? Check out our Arduino Buying Guide!
|Dimensions||5 × 1 × 3 cm|